Maxwell's Hardware
Summit Tractors 25 HP Tractor with Backhoe and Loader
SKU:
22580030
MFG #:
TX25LX85TLB-DS
IMPORTANT: This item ships direct from the Manufacturer and may require additional processing time. Please see the shipping tab below for more information.
Summit Tractors believes that when you purchase a tractor, it should come ready to operate any attachment or implement required to do the job. Standard features include rear hydraulic remotes to power 3-pt implements that require hydraulics, a 3rd function diverter valve integrated with the loader joystick to enable use of a grapple or hydraulically controlled front blade. A self-leveling loader that keeps the load level without the need for constant curling adjustments. Additional standard features include two types of rear drawbars, a front tow hook, rear work light, RimGuard Liquid Tire Ballast in the rear tires, side-view mirrors and a premium, operator weight adjustable suspension seat. No other tractor brand in its HP class has more standard features than a Summit TX25H.
The full sub-frame mounted Summit Tractors BHX76 Backhoe is Made in The U.S. (Kiel Wi) and features an independent operator seat standard, unlike most competitive backhoes that require the tractor operator seat to be pivoted rearward whenever the operator switches from the tractor to backhoe position. The standard mechanical thumbs enables the operator to pick up objects such as boulders, tree stumps and other materials. The standard 12 in bucket is sized right for any job. With the Summit BHX76 Backhoe, Summit TX25H tractor owners can unleash the power to dig drainage ditches, culverts, remove tree stumps, install irrigation, build French drains and dig holes up to 6 ft 4 in deep and as wide as needed. With a Summit TX25H Tractor with front-end loader and backhoe, you can tackle just about any project to support your land management needs.
The full sub-frame mounted Summit Tractors BHX76 Backhoe is Made in The U.S. (Kiel Wi) and features an independent operator seat standard, unlike most competitive backhoes that require the tractor operator seat to be pivoted rearward whenever the operator switches from the tractor to backhoe position. The standard mechanical thumbs enables the operator to pick up objects such as boulders, tree stumps and other materials. The standard 12 in bucket is sized right for any job. With the Summit BHX76 Backhoe, Summit TX25H tractor owners can unleash the power to dig drainage ditches, culverts, remove tree stumps, install irrigation, build French drains and dig holes up to 6 ft 4 in deep and as wide as needed. With a Summit TX25H Tractor with front-end loader and backhoe, you can tackle just about any project to support your land management needs.
Summit TX25H Tractor Specs | |
ENGINE | |
Engine Manufacture | Mitsubishi |
Engine Type | Natural Aspiration |
Gross Engine Power HP | 24.7 HP |
PTO HP | 18 HP |
Rated Engine Speed | 2500 |
Number of Cylinders | 3 |
Displacement | 80.42 cu.in. |
Cooling system | Liquid |
Air Cleaner | Dual Element |
Altenator | 12V42A |
Starting Aid | Glow Plug |
Fuel System Type | Indirect Fuel Injection |
Fuel Tank Capacity | 6.9 U.S. gal |
POWERTRAIN | |
Transmission Type | 2-Range Hydrostatic |
Forward/Reverse Foot Control | Side-by-side Pedals |
Cruise Control | Standard |
Max Traveling Speed | 11.32 mph |
Brakes | Wet Disc |
Steering | Hydraulic |
HYDRAULIC SYSTEM | |
Pump Type | Open Center |
Implement Flow | 4.8 gpm |
Category 3-pt Hitch | 1 |
3-PT Hitch Lift Capacity | 1322 lb |
At 24 inches Behind Link Ends | 1168 lb |
Lift Control Type | Position Control |
Rear Remote Valves | 1 Set self Canceling Detent Standard |
3rd Function Dverter Valve | Standard w/ Loader |
DIMENSIONS | |
Overall Length with R14T Tires | 113.6 in |
Overall Width with R14T Tires | 54 in |
Wheelbase | 61.8 in |
Height to Top of ROPS in | 92.1 in |
Min. Ground Clearance | 9.6 Front Axle |
Total Weight | 2513 lb |
Total Length w/ Loader | 152 in |
Total weight w/loader and Rimguard | 3406 lb |
LX85 Loader Specs | |
Max Lifting height at Pivot Pin | 83 in |
Clearance with Attachment Dump | 61 in |
Reach at Maximum Height | 34 in |
Reach at Bucket on Ground | 63.4 in |
Max Dump Angle | 42 |
Ataachment Rollback Angle | 41 |
Breakout Force At Pivot Pin (dig position) | 1477 lb |
Bucket Width | 48 in |
Lifting Capacity to Full Height at Pivot Pin | 1102 lb |
Lifting Capacity to Full Height at 500mm Ahead of Pivot Point | 1234 lb |
SUMMIT BHX76 BACKHOE SPECS | |
Model | BHX76 |
Independent Operator Seat | Standard |
Mechanical Thumb | Standard |
Tractor Attachment Type | Full Subframe Mount |
Bucket Sizes | 12 in Standard, Optional 8 in, 16 in |
Street Pads | Optional |
Maximum Digging Depth | 78 in |
Digging Depth (Two Foot Flat Bottom) | 76 in |
Swing Arc | 148 Degrees |
Loading Height (Bucket at 60 Degrees) | 64 in |
Reach From Center Line of Swing Point | 109 in |
Transport Height (Maximum) | 72 in |
Bucket Rotation | 180 Degrees |
Loading Reach (Bucket at 60 Degrees) | 35 in |
Transport Overhang | 37 in |
Undercut | 15 in |
Stabilizer Spread, Down Position | 74 in |
Stabilizer Spread, Up Position | 59 in |
Bucket Cylinder Digging Force | 2270 lb |
Dipperstick Cylinder Digging Force | 1248 lb |
Hydraulic Volume Requirements | 2 to 4 GPM |
Hydraulic Pressure Requirements | 2100 PSI |
Backhoe Weight With Thumb and Bucket | 790 lb |
Overall Operating Height - Fully Raised | 112 in |
This item ships directly from the manufacturer and will take 4 to 5 weeks to process and ship. Once the order is placed it cannot be cancelled. Please see our Shipping policy for questions on returns, exchanges and damaged items.